Patienteninformation

Home Klinischen Studien

Klinischen Studien seit 1992

2009

  • 2009, Sbordone L., Menchini-Fabris G.B., Toti P., Sbordone C., Califano L., Guidetti F., "Clinical survey of neurosensory side-effects of mandibular parasymphyseal bone harvesting", International Journal of Oral and Maxillofacial Surgery (Int J Oral Maxillofac Surg), Volume 38, 2, pp. 139-145
  • 2009, Korth Olaf, Korholz Jochem, "Implantate per PC", Dental Magazin, Volume 27, 2

2008

  • 2008, Ruppin J., Popovic A., Strauss M., Spüntrup E., Steiner A., Stoll C., "Evaluation of the accuracy of three different computer-aided surgery systems in dental implantology: optical tracking vs. stereolithographic splint systems", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 19, 7, pp. 709-716
  • 2008, Hohl Steffen, "Die ideale prothetische Restauration - durch Computernavigation vorhersagbar", Dent Implantol (Dent Implantol), Volume 12, 1, pp. 6-9
  • 2008, Azari Abbas, Nikzad Sakineh, "Flapless implant surgery: Review of the literature and report of 2 cases with computer-guided surgical approach", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 66, 5, pp. 1015-1021
  • 2008, Mandelaris G.A., Rosenfeld A.L., "The expanding influence of computed tomography and the application of computer-guided implantology", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 20, 5, pp. 297-305
  • 2008, Nikzad S., Azari A., "A novel stereolithographic surgical template for planning treatment involving a mandibular dental implant", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 66, 7, pp. 1446-1454
  • 2008, Frank E., "Weiterverarbeitung von CT - bzw. DVT-Bilddaten, Schablonentechniken", Zeitschrift für Zahnärztliche Implantologie (ZZI), Volume Juli
  • 2008, Ganz Scott D., "Computer-aided design/computer-aided manufacturing applications using CT and Cone Beam CT scanning technology", Dental Clinics of North America (Dent Clin N Am), Volume 52, 4, pp. 777-808
  • 2008, Tardieu Philippe, "Computer-guided implantology in aesthetic cases", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 19, 9, pp. 839
  • 2008, Hohl Steffen, Hermanns Pia, "Implantate für die Ewigkeit?" Was macht den langzeitigen Erfolg von Implantaten aus?", Implantologie Journal, 3, pp. 8-12
  • 2008, Van de Velde Tommie, Glor Fadi, De Bruyn Hugo, "A model study on flapless implant placement by clinicians with a different experience level in implant surgery", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 19, 1, pp. 66-72
  • 2008, Azari Abbas, Nikzad Sakineh, "Flapless implant surgery: Review of the literature and report of 2 cases with computer-guided surgical approach", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 66, 5, pp. 1015-1021
  • 2008, Mandelaris G.A., Rosenfeld A.L., "The expanding influence of computed tomography and the application of computer-guided implantology", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 20, 5, pp. 297-305
  • 2008, Nikzad S., Azari A., "A novel stereolithographic surgical template for planning treatment involving a mandibular dental implant", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 66, 7, pp. 1446-1454
  • 2008, Frank E., "Weiterverarbeitung von CT - bzw. DVT-Bilddaten, Schablonentechniken", Zeitschrift für Zahnärztliche Implantologie (ZZI), Volume Juli
  • 2008, Ganz Scott D., "Computer-aided design/computer-aided manufacturing applications using CT and Cone Beam CT scanning technology", Dental Clinics of North America (Dent Clin N Am), Volume 52, 4, pp. 777-808
  • 2008, Tardieu Philippe, "Computer-guided implantology in aesthetic cases", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 19, 9, pp. 839
  • 2008, Wang Y.X., Tang Y.S., Shi J., Xu B., "Experimental study of orbital volume using computer assisted technology", Shanghai Kou Qiang Yi Xue (Shanghai Journal of Stomatology), Volume 17, 3, pp. 297-299
  • 2008, Mandelaris George A., Rosenfeld Alan L., "A Novel Approach to the Antral Sinus Bone Graft Technique: The Use of a Prototype Cutting Guide for Precise Outlining of the Lateral Wall. A Case Report", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 28, 6, pp. 569-575
  • 2008, Scher Eddie, "Life threatening consequences due to implant placement in the mandible", Implant Practice, Volume 1, 1, pp. 52-53

2007

  • 2007, Philippe Benoît, "Chirurgie reconstructrice pré-implantaire. Le site donneur mandibulaire antérieur", Information Dentaire (Inf Dent, id), Volume 89, 8, pp. 351-358
  • 2007, Lee Woo-Sik, "Three-dimensional CT based planning and implant surgery with SimPlant program: A case report", Clinical Implant Magazine, Volume 1-2, pp. 74-95
  • 2007, Lee Woo-Sik, "Three-dimensional CT based plannning and implant surgery with SimPlant program: a case report", Clinical Implant Magazine, pp. 78-101
  • 2007, Van de Velde T., De Bruyn H., "Flapless surgery and immediate loading versus the classical surgical protocol", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. xxxvii
  • 2007, Ganz Scott D., "CT-derived model-based surgery for immediate loading of maxillary anterior implants", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 19, 5, pp. 311-318
  • 2007, Caillon P., Buthiau D., Defrennes D., "Le Various Implant Platform Lateral (VIP-L). Application clinique d'un nouveau guide chirurgical", Implant, Volume 13, 3, pp. 167-183
  • 2007, Depprich Rita A., Ommerborn Michell A., Handschel Jörg G.K., Naujoks Christian D., Meyer Ulrich, Kübler Norbert R., "Dentin dysplasia type I: a challenge for treatment with dental implants", Head & Face Medicine, Volume 3, pp. 31-35
  • 2007, Rinaldi M., "Cyst enucleation and immediate placement of oral implants with custom-made bone graft", Computer Aided Implantology Academy Newsletter, Volume 11, November
  • 2007, Groselj D., Groselj H., "Correlation between CT values of the bone and density types", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. lxxviii-lxxix
  • 2007, Halbach-Spielau M., Spielau T., "Computergestützte minimalinvasive Implantation. Sofortversorgung durch präfabrizierte, definitive Zirkonaufbauten und Kronen mittels Safe-Bohrschablonen", Implantologie Journal, 8, pp. 32-35
  • 2007, Palumbo Alessandro, "L’implantologia moderna guidata dal computer", Odontolatria, pp. 3-5
  • 2007, Tardieu P., Vrielinck L., Escolano E., Henne M., Tardieu A.-L., "Computer-assisted implant placement: scan template, SimPlant, SurgiGuide, and SAFE system", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 27, 2, pp. 141-149
  • 2007, Valente F., Schiroli G., Sbrenna A, "Accuracy and clinical outcomes of Computer Aided Oral Implant Surgery: a preliminary study on 25 patients", International Journal of Computer Assisted Radiology and Surgery (Int J Comput Assist Radiol Surg), Volume 2 , Supplement 1 (Proceedings of 21the International Congress and Exhibition, Berlin Germany, June 27-30, 2007)
  • 2007, Valente F., Schiroli G., Sbrenna A, "Computer aided oral implant surgery (CAOIS): a clinical and radiographic multicenter study on 25 patients", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. lxxiv
  • 2007, Valente F., Schiroli G., Sbrenna A, "Accuracy and clinical outcomes of Computer Aided Oral Implant Surgery: a preliminary study on 25 patients", International Journal of Computer Assisted Radiology and Surgery (Int J Comput Assist Radiol Surg), Volume 2 , Supplement 1 (Proceedings of 21the International Congress and Exhibition, Berlin Germany, June 27-30, 2007)
  • 2007, Valente F., Schiroli G., Sbrenna A, "Computer aided oral implant surgery (CAOIS): a clinical and radiographic multicenter study on 25 patients", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. lxxiv
  • 2007, Tardieu P., Vrielinck L., Escolano E., Henne M., Tardieu A.-L., "Computer-assisted implant placement: scan template, SimPlant, SurgiGuide, and SAFE system", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 27, 2, pp. 141-149
  • 2007, Chau Anson C.M., Li Thomas K.L., Mok W.H., "3D models showing relationship between horizontally impacted mandibular third molars and inferior dental canals using computed tomographic images", Journal of Maxillofacial & Oral Surgery (INDIA), Volume 6, 4, pp. 17-21
  • 2007, Yasui M., Okumura Y., Shimada J., "Radiological and sequential analysis on transplanted beta-tricalcium phosphate in beagle mandible", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 65, 9, Supplement 1, pp. 43e68
  • 2007, Orentlicher G., Goldsmith D., "Computer-guided implantology - A New Era", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 65, 9, Supplement 1, pp. 71
  • 2007, Chang Paul P., Henegbarth Ernst A., Lang Lisa A., "Maxillary zirconia implant fixed partial dentures opposing an acrylic resin implant fixed complete denture: a two-year clinical report", The Journal of Prosthetic Dentistry (J Prosthet Dent), Volume 97, 6, pp. 321-330
  • 2007, Philippe Benoît, "Chirurgie reconstructrice pré-implantaire. Le site donneur mandibulaire antérieur", Information Dentaire (Inf Dent, id), Volume 89, 8, pp. 351-358
  • 2007, Lee Woo-Sik, "Three-dimensional CT based planning and implant surgery with SimPlant program: A case report", Clinical Implant Magazine, Volume 1-2, pp. 74-95
  • 2007, Lee Woo-Sik, "Three-dimensional CT based plannning and implant surgery with SimPlant program: a case report", Clinical Implant Magazine, pp. 78-101
  • 2007, Van de Velde T., De Bruyn H., "Flapless surgery and immediate loading versus the classical surgical protocol", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. xxxvii
  • 2007, Ganz Scott D., "CT-derived model-based surgery for immediate loading of maxillary anterior implants", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 19, 5, pp. 311-318
  • 2007, Navarrete Alfonso, "Review of Book "Dental Applications of Computerized Tomography: Surgical Planning for Implant Placement", Journal of Prosthodontics (J Prosthodont), Volume 16, 3, pp. 226-227
  • 2007, Caillon P., Buthiau D., Defrennes D., "Le Various Implant Platform Lateral (VIP-L). Application clinique d'un nouveau guide chirurgical", Implant, Volume 13, 3, pp. 167-183
  • 2007, Ganz Scott D., "3-D Imaging and Cone Beam CT is "Where the Action is!", Inside dentistry, Volume February, pp. 102-103
  • 2007, Depprich Rita A., Ommerborn Michell A., Handschel Jörg G.K., Naujoks Christian D., Meyer Ulrich, Kübler Norbert R., "Dentin dysplasia type I: a challenge for treatment with dental implants", Head & Face Medicine, Volume 3, pp. 31-35
  • 2007, Rinaldi M., "Cyst enucleation and immediate placement of oral implants with custom-made bone graft", Computer Aided Implantology Academy Newsletter, Volume 11, November
  • 2007, Groselj D., Groselj H., "Correlation between CT values of the bone and density types", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 18, 5, pp. lxxviii-lxxix
  • 2007, Bellaiche Norbert, "Scanner et tomographie à faisceau conique. Quelle méthode d'imagerie choisir en odontostomatologie?", Le Fil Dentaire, Volume 27, pp. 16-22
  • 2007, Frank E., "Augen auf beim DVT-Kauf", Zeitschrift für Zahnärztliche Implantologie (ZZI), Volume 23, 4, pp. 2-11
  • 2007, Halbach-Spielau M., Spielau T., "Computergestützte minimalinvasive Implantation. Sofortversorgung durch präfabrizierte, definitive Zirkonaufbauten und Kronen mittels Safe-Bohrschablonen", Implantologie Journal, 8, pp. 32-35
  • 2007, Palumbo Alessandro, "L’implantologia moderna guidata dal computer", Odontolatria, pp. 3-5

2006

  • 2006, Jabero M., Sarment D.P., "Advanced Surgical Guidance Technology: A Review", Implant Dentistry (Implant Dent), Volume 15, 2, pp. 135-142
  • 2006, Kater W., Seeberger R., Davids R., Schäfer D., "CT-basierte Distraktion des Unterkiefers mit Gelenkrekonstruktion und Impaktation der Maxilla bei Kiefergelenkankylose [CT assisted mandibular osteodistraction with reconstruction of the temporomandibular joint and two piece maxilla]", Mund-, Kiefer- und Gesichtschirurgie (Mund Kiefer GesichtsChir, MKG), Volume 10, 1, pp. 50-55
  • 2006, Lal K., White G.S., Morea D.N., Wright R.F., "Use of stereolithographic templates for surgical and prosthodontic implant planning and placement. Part I. The concept", Journal of Prosthodontics (J Prosthodont), Volume 15, 1, pp. 51-58
  • 2006, Valente F., Sbrenna A., Buoni C., "CAD CAM drilling guides for transferring CT-based digital planning to flapless placement of oral implants in complex cases", International Journal of Computer Assisted Radiology and Surgery (Int J Comput Assist Radiol Surg), Volume 1, Supplement 1, June, pp. 413-415
  • 2006, Pretorius Nicolette, "For predictable results: Radio-opaque scanning stents", Dental Technologies (Dent Tech), Volume 64, pp. 5-11
  • 2006, Widmann G., Bale R.J., "Accuracy in computer-aided implant surgery - a review", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 21, 2, pp. 305-313
  • 2006, Valente F., Buoni C., Scarfò B., Mascolo A., Parducci F., "Precision of CAD-CAM stereolithographic mucosa-supported drilling guides in flapless implant placement", European Journal of Implant Prosthodontics (Europ J Impl Prosth), Volume 1, 2, pp. 15-25
  • 2006, Valente F., Buoni C., Scarfò B., Mascolo A., Parducci F., "Precisione delle guide stereolitografiche CAD-CAM ad appoggio mucoso nel posizionamento degli impianti senza sollevamento del lembo", European Journal of Implant Prosthodontics (Europ J Impl Prosth), Volume 1, 2, pp. 15-25
  • 2006, Chow J., Hui E., Lee P.K.M., Li W., "Zygomatic implants-Protocol for immediate occlusal loading: a preliminary report", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 64, 5, pp. 804-811
  • 2006, Ganz Scott D., "Techniques for the use of CT imaging for the fabrication of surgical guides", Atlas of the Oral and Maxillofacial Surgery Clinics of North America (Atlas Oral Maxillofac Surg Clin N Am), Volume 14, 1, pp. 75-97
  • 2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 1: Diagnostics, imaging, and collaborative accountability", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 3, pp. 215-221
  • 2006, Dakhno L.A., "Ways fo protection of the patient and the clinician from an injury of the inferior alveolar nerve during the implant installation", News of stomatology (Russian journal) (HC), Volume 2, 47, pp. 81-84
  • 2006, Brüggen F., "Implantatplanung mit CT-Daten", Implantologie Journal, Volume 5, pp. 32-38
  • 2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 2: Rapid-prototype medical modelling and stereolithographic drilling guides requiring bone exposure", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 4, pp. 347-353
  • 2006, Lal K., White G.S., Morea D.N., Wright R.F., "Use of stereolithographic templates for surgical and prosthodontic implant planning and placement. Part II. A clinical report", Journal of Prosthodontics (J Prosthodont), Volume 15, 2, pp. 117-122
  • 2006, Valente F., Schiroli G., Sbrenna A., Buoni C., Gazzerro C., "Computer-aided flapless implantology: combining clinical experience and scientific evidence", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 4, pp. xlv
  • 2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically Directed Implant Placement Using Computer Software to Ensure Precise Placement and Predictable Prosthetic Outcomes. Part 3: Stereolithographic Drilling Guides That Do Not Require Bone Exposure and the Immediate Delivery of Teeth", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 5, pp. 493-499
  • 2006, Giuseppe Luongo, "Chirugia implantare assistita dal computer", Implantologia, Volume Implantologia Orale 2006, 1, pp. 7-31
  • 2006, Pretorius Nicolette, "For predictable results: Radio-opaque scanning stents", Dental Technologies (Dent Tech), Volume 64, pp. 5-11
  • 2006, Shapurian T., Damoulis P.D., Reiser G.M., Griffing T.J., Rand W.M., "Quantitative evaluation of bone density using the Hounsfield index", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 21, 2, pp. 290-297
  • 2006, Feuerstein Paul, "Cone beam tomography and the future of implant planning", Inside dentistry, Volume March, pp. 2-3
  • 2006, Valente F., Buoni C., Scarfò B., Mascolo A., Parducci F., "Precision of CAD-CAM stereolithographic mucosa-supported drilling guides in flapless implant placement", European Journal of Implant Prosthodontics (Europ J Impl Prosth), Volume 1, 2, pp. 15-25
  • 2006, Valente F., Buoni C., Scarfò B., Mascolo A., Parducci F., "Precisione delle guide stereolitografiche CAD-CAM ad appoggio mucoso nel posizionamento degli impianti senza sollevamento del lembo", European Journal of Implant Prosthodontics (Europ J Impl Prosth), Volume 1, 2, pp. 15-25
  • 2006, Chow J., Hui E., Lee P.K.M., Li W., "Zygomatic implants-Protocol for immediate occlusal loading: a preliminary report", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 64, 5, pp. 804-811
  • 2006, Ganz Scott D., "Techniques for the use of CT imaging for the fabrication of surgical guides", Atlas of the Oral and Maxillofacial Surgery Clinics of North America (Atlas Oral Maxillofac Surg Clin N Am), Volume 14, 1, pp. 75-97
  • 2006, Ganz Scott D., "The reality of anatomy and the triangle of bone", Inside dentistry, Volume June, pp. 72-77
  • 2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 1: Diagnostics, imaging, and collaborative accountability", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 3, pp. 215-221
  • 2006, Trikeriotis D., Paravalou I., Zotalis N., Diamantopoulos P., "Applications of virtual and physical modelling in oral and maxillofacial surgery", Proceedings of CARS, Volume CARS 2006 - Computer Assisted Radiology and Surgery, 20th International Congress and Exhibition, Osaka, Japan, June 28 - July 1, 2006
  • 2006, Dakhno L.A., "Ways fo protection of the patient and the clinician from an injury of the inferior alveolar nerve during the implant installation", News of stomatology (Russian journal) (HC), Volume 2, 47, pp. 81-84
  • 2006, Brüggen F., "Implantatplanung mit CT-Daten", Implantologie Journal, Volume 5, pp. 32-38
  • 2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically directed implant placement using computer software to ensure precise placement and predictable prosthetic outcomes. Part 2: Rapid-prototype medical modelling and stereolithographic drilling guides requiring bone exposure", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 4, pp. 347-353
  • 2006, Lal K., White G.S., Morea D.N., Wright R.F., "Use of stereolithographic templates for surgical and prosthodontic implant planning and placement. Part II. A clinical report", Journal of Prosthodontics (J Prosthodont), Volume 15, 2, pp. 117-122
  • 2006, Orentlicher G., Goldsmith D., "Computer-Guided Implantology - A New Era", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 64, 9, Supplement 1, pp. 123
  • 2006, Valente F., Schiroli G., Sbrenna A., Buoni C., Gazzerro C., "Computer-aided flapless implantology: combining clinical experience and scientific evidence", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 4, pp. xlv
  • 2006, Rosenfeld Alan L., Mandelaris George A., Tardieu Philippe B., "Prosthetically Directed Implant Placement Using Computer Software to Ensure Precise Placement and Predictable Prosthetic Outcomes. Part 3: Stereolithographic Drilling Guides That Do Not Require Bone Exposure and the Immediate Delivery of Teeth", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 26, 5, pp. 493-499
  • 2006, Grybauskas Simonas, Puisys Algirdas, Linkevicius Tomas, "Ortognatine chirurgija: kaip padaryti veida patrauklu?", Gydymo menas, Volume 9, pp. 63-68
  • 2006, Holmes Simon, Goldner Sean, Bridle Chris, Chin-Shong David, Visram Karima, "Evaluation of complex craniomaxillofacial fractures by a new three-dimensional planning system", British Journal of Oral and Maxillofacial Surgery (Br J Oral Maxillofacial Surg, bjoms), Volume 44, 5, pp. 416-417
  • 2006, Handelsman M., "Surgical guidelines for dental implant placement", British Dental Journal, Volume 201, 3, pp. 139-152
  • 2006, Giuseppe Luongo, "Chirugia implantare assistita dal computer", Implantologia, Volume Implantologia Orale 2006, 1, pp. 7-31
  • 2006, Verardi Simone, "CT scans may not be indicated to analyze the distribution of the arteries in the lateral wall of the maxillary sinus", Journal of Evidence-Based Dental Practice, Volume 6, 4, pp. 276-277
  • 2006, Tardieu P., "Computer guided implantology: How far can we go today?", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 4, pp. xxx
  • 2006, Jabero M., Sarment D.P., "Advanced Surgical Guidance Technology: A Review", Implant Dentistry (Implant Dent), Volume 15, 2, pp. 135-142
  • 2006, Van de Velde T.L.A., Glor F.P., De Bruyn H., "A model study on flapless implant positioning and complications", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 4, pp. li
  • 2006, Philippe Benoît, "Chirurgie reconstructrice pré-implantaire. Le site donneur mandibulaire postérieur", Information Dentaire (Inf Dent, id), Volume 88, 10, pp. 491-496
  • 2006, Scarfe W.C., Farman A.G., Sukovic P., "Clinical applications of cone-beam computed tomography in dental practice", Journal of the Canadian Dental Association (J Can Dent Assoc, JCDA), Volume 72, 1, pp. 75-80
  • 2006, Lal K., White G.S., Morea D.N., Wright R.F., "Use of stereolithographic templates for surgical and prosthodontic implant planning and placement. Part I. The concept", Journal of Prosthodontics (J Prosthodont), Volume 15, 1, pp. 51-58
  • 2006, Stoppie N., Pattijn V., Van Cleynenbreugel T., Wevers M., Vander Sloten J., Naert I., "Structural and radiological parameters for the characterization of jawbone", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 17, 2, pp. 124-133
  • 2006, Valente F., Sbrenna A., Buoni C., "CAD CAM drilling guides for transferring CT-based digital planning to flapless placement of oral implants in complex cases", International Journal of Computer Assisted Radiology and Surgery (Int J Comput Assist Radiol Surg), Volume 1, Supplement 1, June, pp. 413-415
  • 2006, Tardieu P., Pattijn V., Glor F., "Computer guided implantology: 2006 developments. Dr. James and Virtual teeth.", Dental Horizons, Volume 4, 1, pp. 283-289
  • 2006, Mischkowski R.A., Zinser M.J., Neugebauer J., Kubler A.C., Zoller J.E., "Comparison of static and dynamic computer-assisted guidance methods in implantology", International Journal of Computerized Dentistry (Int J Comput Dent), Volume 9, 1, pp. 23-35

2005

  • 2005, Dakhno L.A., "Maxillofacial surgery planning for the insertion of dental implants obtained from CT data using the SimPlant interactive software", Implantology & Paradontology & Osteology (Ukraine, Lviv), Volume 2, 2, pp. 23-27
  • 2005, Ganz Scott D., "Presurgical planning with CT-derived fabrication of surgical guides", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 63, 9, pp. 59-71 (Suppl 2)
  • 2005, Dakhno L.A., "Maxillofacial surgery planning for the insertion of dental implants obtained from CT data using the SimPlant interactive software", Implantology & Paradontology & Osteology (Ukraine, Lviv), Volume 2, 2, pp. 23-27
  • 2005, Valente Francesco, "L'utilizzo di SimPlant e SurgiGuides per una corretta osteotomia implantare in chirurgia flapless", Il Dentista Moderno (DM), Volume 4 (aprile), pp. 101-109
  • 2005, Caldwell C. Stephen, "Practical incorporation of computed tomography into daily implant treatment", Texas Dental Journal (Tex Dent J), Volume April, pp. 343-354
  • 2005, Mrazek Bill, "LAB dialogue: 'X' marks the spot", Compendium, Volume 26, 4, pp. 278-279
  • 2005, Sudbrink Steven D., "Computer-Guided Implant Placement with Immediate Provisionalization: A Case Report", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 63, 6, pp. 771-774
  • 2005, Ganz Scott D., "Use of conventional CT and cone beam (CBCT) for improved dental diagnostics and implant planning", American Association of Dental Radiographic Technicians Newsletter (AADMRT Newsletter), Volume Spring, pp. 7 pages
  • 2005, Ikumi Noriharu, Tsutsumi Sadami, "Assessment of correlation between computerized tomography values of the bone and cutting torque values at implant placement: a clinical study", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 20, 2, pp. 253-260
  • 2005, "The SimPlant Platform", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 20, 3, pp. 342
  • 2005, Nijmeh A.D., Goodger N.M., Hawkes D., Edwards P.J., McGurk M., "Image-guided navigation in oral and maxillofacial surgery", British Journal of Oral and Maxillofacial Surgery (Br J Oral Maxillofacial Surg, bjoms), Volume 43, 4, pp. 294-302
  • 2005, Mengel R., Candir M., Shiratori K., Flores-de-Jacoby L., "Digital volume tomography in the diagnosis of periodontal defects: an in vitro study on native pig and human mandibles", Journal of Periodontology (J Periodontol), Volume 76, 5, pp. 665-673
  • 2005, Todisco Marzio, Trisi Paolo, "Bone mineral density and bone histomorphometry are statistically related", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 20, 6, pp. 898-904
  • 2005, Di Giacomo G.A., Cury P.R., de Araujo N.S., Sendyk W.R., Sendyk C.L., "Clinical application of stereolithographic surgical guides for implant placement: Preliminary results", Journal of Periodontology (J Periodontol), Volume 76, 4, pp. 503-507
  • 2005, Ganz Scott D., "Presurgical planning with CT-derived fabrication of surgical guides", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 63, 9, pp. 59-71 (Suppl 2)
  • 2005, Lemmerman K.J., Lemmerman N.E., "Osseointegrated dental implants in private practice: a long-term case series study", Journal of Periodontology (J Periodontol), Volume 76, 2, pp. 310-319
  • 2005, Al-Harbi S.A., Verrett R.G., "Fabrication of a stable surgical template using staged tooth extraction for immediate implant placement", The Journal of Prosthetic Dentistry (J Prosthet Dent), Volume 94, 4, pp. 394-397
  • 2005, Ganz Scott D., "Use of conventional CT and cone beam (CBCT) for improved dental diagnostics and implant planning", American Association of Dental Radiographic Technicians Newsletter (AADMRT Newsletter), Volume Spring, pp. 7 pages
  • 2005, Ikumi Noriharu, Tsutsumi Sadami, "Assessment of correlation between computerized tomography values of the bone and cutting torque values at implant placement: a clinical study", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 20, 2, pp. 253-260
  • 2005, "The SimPlant Platform", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 20, 3, pp. 342
  • 2005, Tischler M., "Dental implant Placement in the Maxillary Anterior Region: Guidelines for Esthetic Success", Dentistry Today (Dent Today), Volume 24, 3, pp. 72,74,76
  • 2005, Valente Francesco, "L'utilizzo di SimPlant e SurgiGuides per una corretta osteotomia implantare in chirurgia flapless", Il Dentista Moderno (DM), Volume 4 (aprile), pp. 101-109
  • 2005, Caldwell C. Stephen, "Practical incorporation of computed tomography into daily implant treatment", Texas Dental Journal (Tex Dent J), Volume April, pp. 343-354
  • 2005, Moore William S., "Cone Beam CT: a new tool for Esthetic Implant Planning", Texas Dental Journal (Tex Dent J), Volume April, pp. 334-340
  • 2005, Mrazek Bill, "LAB dialogue: 'X' marks the spot", Compendium, Volume 26, 4, pp. 278-279
  • 2005, Yolanda Lopez Martinez, "utilidad de la cefalometria tridimensional en el diagnostico y plan de tratamiento ortodoncico-quiru", Masters Thesis, pp. 43
  • 2005, Sudbrink Steven D., "Computer-Guided Implant Placement with Immediate Provisionalization: A Case Report", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 63, 6, pp. 771-774

2004

  • 2004, Schuller-Götzburg P., Sattlegger P., Grossschmidt K., Schachner P. , "3D-Implantatplanung und Stereolithographie-Implantatbohrschablonen", Stomatologie, Volume 101, 3
  • 2004, Schuller-Götzburg P., Sattlegger P., Grossschmidt K., Schachner P., "3D-Implant planning and stereolithography implant drill guide", Stomatologie, Volume 101, 3
  • 2004, Materialise , "Virtuele planning van implantaten in drie dimensies", Dentist News (Dent News), Volume 3, April, pp. 31-33
  • 2004, Sammartino G., Della Valle A., Marenzi G., Gerbino S., Martorelli M., Espedito di Lauro A., di Lauro F., "Stereolithography in Oral Implantology: A Comparison of Surgical Guides", Implant Dentistry (Implant Dent), Volume 13, 2, pp. 133-136
  • 2004, Abeloos Johan, Barbier Lieven, "Tandimplantaten met vaste brug in één dag incisieloze plaatsing van tandimplantaten in de bovenkaak m.b.v. een computergemaakte boormal en plaatsen van de tijdelijke vaste brug op dezelfde dag, casus", AZ Nieuws, Volume 11, april, pp. 8
  • 2004, Materialise , "Virtuele planning van implantaten in drie dimensies", Dentist News (Dent News), Volume 3, April, pp. 31-33
  • 2004, Sammartino G., Della Valle A., Marenzi G., Gerbino S., Martorelli M., Espedito di Lauro A., di Lauro F., "Stereolithography in Oral Implantology: A Comparison of Surgical Guides", Implant Dentistry (Implant Dent), Volume 13, 2, pp. 133-136
  • 2004, Mupparapu Muralidhar, Singer Steven R., "Implant Imaging for the Dentist", Journal of the Canadian Dental Association (J Can Dent Assoc, JCDA), Volume 70, 1, pp. 32,32a-32g
  • 2004, Schuller-Götzburg P., Sattlegger P., Grossschmidt K., Schachner P. , "3D-Implantatplanung und Stereolithographie-Implantatbohrschablonen", Stomatologie, Volume 101, 3
  • 2004, Schuller-Götzburg P., Sattlegger P., Grossschmidt K., Schachner P., "3D-Implant planning and stereolithography implant drill guide", Stomatologie, Volume 101, 3
  • 2004, Tischler M., "Dental implants in the esthetic zone: Considerations for form and function", The New York State Dental Journal (NYSDJ), Volume 70, 3, pp. 22-26
  • 2004, Bianchi J., Fiorellini J.P., Howell T.H., Sekler J., Curtin H., Nevins M.L., Friedland B., "Measuring the efficacy of rhBMP-2 to regenerate bone: a radiographic study using a commercially available software program", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 24, 6, pp. 579-587
  • 2004, Tischler Michael, "Interactive computerized tomography for dental implants: treatment planning from the prosthetic end result", Dentistry Today (Dent Today), Volume 23, 3, pp. 90,92-93
  • 2004, Tischler Michael, "Full arch fixed prosthetics supported by dental implants and natural teeth: planning, provisionalization, treatment sequences: two case examples", Dentistry Today (Dent Today), Volume 23, 9, pp. 86,88,90-91
  • 2004, Abeloos Johan, Barbier Lieven, "Tandimplantaten met vaste brug in één dag incisieloze plaatsing van tandimplantaten in de bovenkaak m.b.v. een computergemaakte boormal en plaatsen van de tijdelijke vaste brug op dezelfde dag, casus", AZ Nieuws, Volume 11, april, pp. 8

2003

  • 2003, Ganz Scott D. , "Use of stereolithographic models as diagnostic and restorative aids for predictable immediate loading of implants", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 15, 10, pp. 763-772
  • 2003, Jacobs R. , "Preoperative radiologic planning of implant surgery in compromised patients.", Periodontology 2000 (Periodontol 2000), Volume 33, pp. 12-25
  • 2003, Sarment David P., Al-Shammari K., Kazor Christopher E. , "Stereolythographic surgical templates for placement of dental implants in complex cases", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 23, 3, pp. 287-295
  • 2003, Sarment David P., Sukovic P., Clinthorne N. , "Accuracy of implant placement with a stereolithographic surgical guide", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 18, 4, pp. 571-577
  • 2003, Tardieu P.B., Vrielinck L., "Computer-assisted implantology: the SimPlant program and the SAFE System. Immediate loading of a mandibular bridge on transmucosal implants", Implant, Volume 9, 1, pp. 15-28
  • 2003, Firdaus H., "Implant placement on the narrow maxillary ridge: Use of a stereolithography drill guide", Headlines, 4, pp. p 7
  • 2003, Misch Craig M. , "Evaluating bone defects and simulating corrections using SimPlant planning software and stereolithographic models", Headlines, 2, pp. p4-8
  • 2003, Tardieu P., Vrielinck L., Escolano E. , "Computer-assisted Implant Placement. A Case Report: Treatment of the Mandible", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 18, 4, pp. 599-604
  • 2003, Tardieu Philippe B., Vrielinck L. , "Implantologie assistée par ordinateur: le programme SimPlant/SurgiCase et le SAFE System. Mise en charge immédiate d'un bridge mandibulaire avec des implants transmuqueux.", Implant, Volume 9, 1, pp. 15-28
  • 2003, van Steenberghe D., Malevez C., Van Cleynenbreugel J., Serhal C.B., Dhoore E., Schutyser F., Suetens P., Jacobs R., "Accuracy of drilling guides for transfer from three-dimensional CT-based planning to placement of zygoma implants in human cadavers", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 14, 1, pp. 131-136
  • 2003, Vrielinck L., Politis C., Schepers S., Pauwels M., Naert I. , "Image-based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides. Preliminary results from a prospective clinical follow-up study", International Journal of Oral and Maxillofacial Surgery (Int J Oral Maxillofac Surg), Volume 32, 1, pp. 7-14
  • 2003, Rodriguez A., Anastassov G.E., Lee H., Buchbinder D., Wettan H., "Maxillary sinus augmentation with deproteinated bovine bone and platelet rich plasma with simultaneous insertion of endosseous implants", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 61, 2, pp. 157-163
  • 2003, Levine M.H., Goddard A.L., Dodson T.B., "Inferior Alveolar Nerve Canal Position: A Clinical and Radiographic Study", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 61, 8, Supplement 1, pp. 72
  • 2003, Pietz W.M., Burton R.G., Fridrich K.L., Stanford C.M., Schneider R., "Bone Quality and Surgeon's Assessment During Maxillary Implant Placement: Outcomes 2 Years Following Prosthesis Insertion", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 61, 8, Supplement 1, pp. 72a-73
  • 2003, Ganz Scott D., Kraut Richard A., "Are Implant prosthetic procedures like everyday crown and bridge dentistry?", Implant Dentistry (Implant Dent), Volume 12, 3, pp. 193-197
  • 2003, Tischler M., "Simplified Fixed Implant Prosthetics", Dentistry Today (Dent Today), Volume 22, 9, pp. 84-86
  • 2003, Scortecci G., Misch C., Odin G., "Implantologie basale: une approche thérapeutique fondée sur la preuve", Implantodontie, Volume 12, pp. 35-47
  • 2003, Misch Craig M. , "Evaluating bone defects and simulating corrections using SimPlant planning software and stereolithographic models", Headlines, 2, pp. p4-8
  • 2003, Vrielinck L., Politis C., Schepers S., Pauwels M., Naert I. , "Image-based planning and clinical validation of zygoma and pterygoid implant placement in patients with severe bone atrophy using customized drill guides. Preliminary results from a prospective clinical follow-up study", International Journal of Oral and Maxillofacial Surgery (Int J Oral Maxillofac Surg), Volume 32, 1, pp. 7-14
  • 2003, Sarment David P., Al-Shammari K., Kazor Christopher E. , "Stereolythographic surgical templates for placement of dental implants in complex cases", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 23, 3, pp. 287-295
  • 2003, Sarment David P., Sukovic P., Clinthorne N. , "Accuracy of implant placement with a stereolithographic surgical guide", The International Journal of Periodontics & Restorative Dentistry (Int J Periodontics Restorative Dent), Volume 18, 4, pp. 571-577
  • 2003, Tardieu P.B., Vrielinck L., "Computer-assisted implantology: the SimPlant program and the SAFE System. Immediate loading of a mandibular bridge on transmucosal implants", Implant, Volume 9, 1, pp. 15-28
  • 2003, Firdaus H., "Implant placement on the narrow maxillary ridge: Use of a stereolithography drill guide", Headlines, 4, pp. p 7
  • 2003, Tardieu P., Vrielinck L., Escolano E. , "Computer-assisted Implant Placement. A Case Report: Treatment of the Mandible", The International Journal of Oral & Maxillofacial Implants (Int J Oral Maxillofac Implants, JOMI), Volume 18, 4, pp. 599-604
  • 2003, Tardieu Philippe B., Vrielinck L. , "Implantologie assistée par ordinateur: le programme SimPlant/SurgiCase et le SAFE System. Mise en charge immédiate d'un bridge mandibulaire avec des implants transmuqueux.", Implant, Volume 9, 1, pp. 15-28
  • 2003, Stroumza J.H., "The role of diagnosis and contemporary technology on endodontic success", Endodontic Therapy: Enhancing Communication Between General Practitioners, Endodontists, and Manufacturers, Volume 3, 1, pp. 0-1
  • 2003, Ganz Scott D. , "Use of stereolithographic models as diagnostic and restorative aids for predictable immediate loading of implants", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 15, 10, pp. 763-772

2002

  • 2002, Claeys Th., Kint J. , "Nut van implantaatsimulatie bij de prothetische rehabilitatie van een klasse 2-maxilla", Dentist News (Dent News), Volume 9, september, pp. 45-49
  • 2002, Vrielinck L., "CT-based Planning for Extra-oral Implant Placement Using Customised Drill Guides", Entific Medical Systems International Updates, Volume 2, pp. 8-10
  • 2002, Tardieu Philippe B., Vrielinck Luc , "Implantologie assistée par ordinateur. Cas clinique: Mise en charge immédiate d'un bridge maxillaire avec des implants à appuis zygomatiques et ptérygoïdiens", Implantodontie, Volume 46, pp. 41-48
  • 2002, Magee Graham , "3D imaging and laser fabricated surgical guides", Dentistry , Volume September, pp. 1-3
  • 2002, Benjamin Lewis, "Using a customized surgical template for computer-guided implant surgery", Dental Implantology Update (Dent Implantol Update), Volume 13, 7, pp. 49-53
  • 2002, Mills E., "SurgiGuide assures accuracy", Headlines, 1, pp. p 3
  • 2002, Gamboa R., "Dr. Gamboa and the Hidden Tooth", Headlines, 1, pp. p2
  • 2002, Claeys Th., Kint J. , "The Use of Implant Simulation in Prosthetic Rehabilitation of a Class II Maxilla", Headlines, 2, pp. p2-3
  • 2002, Poukens J.M.N., Haex J.K., Verdonck H., Riediger D., "Study on the accuracy of stereolithographic surgical guides in dental implantology", Phidias, Volume 8, pp. 8-9
  • 2002, Bou Serhal C., Jacobs R., Van Cleynenbreugel J., van Steenberghe D. , "Validation of a 3D-CT based stereolithographic template for implant placement in an ex vivo atrophic mandible", Clinical Oral Implants Research (Clin Oral Implant Res), Volume 13, 4, pp. xxx
  • 2002, Sarment David P., Misch Carl E., "Scannographic Templates for Novel Pre-implant Planning Methods", International Magazine of Implant Dentistry , Volume 1, 3, pp. 16-22
  • 2002, Benjamin Lewis S. , "The evolution of multiplanar diagnostic imaging: predictable transer of preoperative analysis to the surgical site", Journal of Oral Implantology (J Oral Implantol), Volume 28, 3, pp. 135-144
  • 2002, Claeys Th., Kint J. , "Nut van implantaatsimulatie bij de prothetische rehabilitatie van een klasse 2-maxilla", Dentist News (Dent News), Volume 9, september, pp. 45-49
  • 2002, Gandhi Nailesh , "Treatment considerations for implants in single tooth cases", Dental Asia, May, pp. 21-24
  • 2002, Frank E., Frank S., Nell S., "CT-optimierte implantologische Planung mit dem pst-Schablonensystem und dem 3D-Finder", Teamwork Interdisziplinäres Journal für prothetische Zahnheilkunde (Interdiszipl J Proth Zahnheilkd), Volume 1, pp. 64-70
  • 2002, Benjamin Lewis, "Using a customized surgical template for computer-guided implant surgery", Dental Implantology Update (Dent Implantol Update), Volume 13, 7, pp. 49-53
  • 2002, Benjamin Lewis S. , "The evolution of multiplanar diagnostic imaging: predictable transer of preoperative analysis to the surgical site", Journal of Oral Implantology (J Oral Implantol), Volume 28, 3, pp. 135-144
  • 2002, Tardieu Philippe B., Vrielinck Luc , "Implantologie assistée par ordinateur. Cas clinique: Mise en charge immédiate d'un bridge maxillaire avec des implants à appuis zygomatiques et ptérygoïdiens", Implantodontie, Volume 46, pp. 41-48
  • 2002, Mills E., "SurgiGuide assures accuracy", Headlines, 1, pp. p 3
  • 2002, Gamboa R., "Dr. Gamboa and the Hidden Tooth", Headlines, 1, pp. p2
  • 2002, Claeys Th., Kint J. , "The Use of Implant Simulation in Prosthetic Rehabilitation of a Class II Maxilla", Headlines, 2, pp. p2-3
  • 2002, Scher E. , "Risk management when operating in the posterior mandible", Implant Dentistry (Implant Dent), Volume 11, 1, pp. 67-72
  • 2002, Magee Graham , "3D imaging and laser fabricated surgical guides", Dentistry , Volume September, pp. 1-3
  • 2002, Vrielinck L., "CT-based Planning for Extra-oral Implant Placement Using Customised Drill Guides", Entific Medical Systems International Updates, Volume 2, pp. 8-10
  • 2002, Marmulla R., Brief J., Heurich T., Mühling J., Hassfeld S., "Perspektiven in der rechnergestützten Implantologie", Zeitschrift für Zahnärztliche Implantologie (ZZI), Volume 18, 3, pp. 152-158
  • 2002, Poukens J.M.N., Haex J.K., Verdonck H., Riediger D., "Study on the accuracy of stereolithographic surgical guides in dental implantology", Phidias, Volume 8, pp. 8-9
  • 2002, Ismail S.F.H., Johal A.S., "The role of implants in orthodontics", Journal of Orthodontics (J Orthod), Volume 29, 3, pp. 239-245

2001

  • 2001, Kraut Richard A., "A case for routine computed tomography imaging of the dental alveolus before implant placement", Journal of Oral and Maxillofacial Surgery (J Oral Maxillofac Surg), Volume 59, 1, pp. 64-67
  • 2001, Schultze-Mosgau S., Keweloh M., Wiltfang J., Kessler P., Neukam F.W., "Histomorphometric and densitometric changes in bone volume and structure after avascular bone grafting in the extremely atrophic maxilla", British Journal of Oral and Maxillofacial Surgery (Br J Oral Maxillofacial Surg, bjoms), Volume 39, 6, pp. 439-447
  • 2001, Klein Michael , "The implant team seeing the same vision using computer-guided implant surgery", Academy News (A quarterly publication of the Academy of Osseointegration), Volume 12, 2, pp. 1, 4-5
  • 2001, Reynolds Anthony, Goldner Sean, "Planning Dental Implants - What are the options?", Scottish Dentist, Volume November-December, 53, pp. 2-4
  • 2001, Tardieu P.B., Philippe B., "Edentement complet maxillaire avec atrophie osseuse terminale:prise en charge thérapeutique. A propos d'un cas. Partie 2: Realisation implantaire et prothétique: l'implantologie assistée par ordinateur", Implant, Volume 7, 3, pp. 199-210
  • 2001, Philippe B., Tardieu P.B., Tran-Minh-Thien J.-M. , "Edentement complet maxillaire avec atrophie osseuse: prise en charge thérapeutique. A propos d'un cas. Partie 1: Phase chirurgicale: principes thérapeutiques et indications", Implant, Volume 7, 2, pp. 99-111
  • 2001, Bocklage R. , "Computer analysis of titanium implants in atrophic arch and poor quality bone: a case report", Implant Dentistry (Implant Dent), Volume 10, 3, pp. 162-167
  • 2001, Ganz Scott D. , "CT Scan Technology: An evolving tool for avoiding complications and achieving predictable implant placement and restoration", International magazine of oral implantology, Volume 1, pp. 6-13
  • 2001, Klein M., Abrams M. , "Computer-guided surgery utilizing a computer-milled surgical template", Practical Procedures & Aesthetic Dentistry (Pract Proced Aesthet Dent, PPAD), Volume 13, 2, pp. 165-169
  • 2001, Tardieu P.B., Philippe B., "Edentement complet maxillaire avec atrophie osseuse terminale:prise en charge thérapeutique. A propos d'un cas. Partie 2: Realisation implantaire et prothétique: l'implantologie assistée par ordinateur", Implant, Volume 7, 3, pp. 199-210
  • 2001, Reynolds Anthony, Goldner Sean, "Planning Dental Implants - What are the options?", Scottish Dentist, Volume November-December, 53, pp. 2-4
  • 2001, Lobregts S., Schillings J.J., Vuurberg E. , "Dental Implant surgery: planning and guidance.", Medicamundi, Volume 45, 4, pp. 30-35
  • 2001, Van Cleynenbreugel J., Schutyser F., Malevez C., Dhoore E., Bou Serhal C., Suetens P., van Steenberghe D., "Intra-operative transfer of planned zygomatic fixtures by personalized templates: a cadaver validation study", Medical Image Computing and Computer-Assisted Intervention (Proceedings of MICCAI 2001, 4th International Conference, Utrecht, The Netherlands, October 14-17, 2001) (MICCAI), pp. 1147-1148

2000

  • 2000, Besimo C.E., Lambrecht J.T., Guindy J.S. , "Accuracy of implant treatment planning utilizing template-guided reformatted computed tomography", Dentomaxillofacial Radiology (Dentomaxillofac Radiol), Volume 29, 1, pp. 46-51
  • 2000, Tardieu Philippe B. , "L'implantologie assistée par ordinateur illustrée. Cas clinique d'une mise en charge immédiate complète mandibulaire.", article published on the website of ABCDent (http://www.abcdent.fr/) , pp. 6 pages
  • 2000, Tardieu Philippe , "Aide informatique à la planification et à la réalisation des traitements implantaires. Le concept Materialise et le programme SurgiCase", Article published on the website of Dental Espace
  • 2000, Wouters K., Vrielinck L., Wivell C., Dhoore E. , "Further development of drilling templates for the placement of regular dental implants and zygomatic fixtures, based on preoperative planning on CT images", in Lemke H.U., Vannier M.W., Inamura K., Farman A.G., eds, Computer Assisted Radiology and Surgery, Berlin, Germany: Elsevier Science (CARS), pp. 945-949
  • 2000, Tardieu Philippe B. , "L'implantologie assistée par ordinateur illustrée. Cas clinique d'une mise en charge immédiate complète mandibulaire.", article published on the website of ABCDent (http://www.abcdent.fr/) , pp. 6 pages
  • 2000, Tardieu Philippe , "Aide informatique à la planification et à la réalisation des traitements implantaires. Le concept Materialise et le programme SurgiCase", Article published on the website of Dental Espace
  • 2000, Wouters K., Vrielinck L., Wivell C., Dhoore E. , "Further development of drilling templates for the placement of regular dental implants and zygomatic fixtures, based on preoperative planning on CT images", in Lemke H.U., Vannier M.W., Inamura K., Farman A.G., eds, Computer Assisted Radiology and Surgery, Berlin, Germany: Elsevier Science (CARS), pp. 945-949

1999

  • 1999, Reynolds R.A. , "CT scanning for dental implantology", RAD Magazine , Volume February, pp. 8 pages

1998

  • 1998, Rothman Stephen L.G., "Dental applications of computerized tomography, surgical planning for implant placement", Quintessence books, March
  • 1998, Kraut Richard A., "Interactive CT diagnostics, planning and preparation for dental implants", Implant Dentistry (Implant Dent), Volume 7, 1, pp. 19-25
  • 1998, Babbush Charles A. , "Transpositioning and repositioning the inferior alveolar and mental nerves in conjuction with endosteal implant reconstruction", Periodontology 2000 (Periodontol 2000), Volume 17, pp. 183-190
  • 1998, Kraut Richard A., "Interactive CT diagnostics, planning and preparation for dental implants", Implant Dentistry (Implant Dent), Volume 7, 1, pp. 19-25
  • 1998, Levin R. , "A High-Tech Investment for a more Profitable Practice", CSI booklet
  • 1998, Jacotti M., Todisco M. , "La TAC interattiva nella pianificazione implanto-protesica", dAiaIOG , Volume 1, Febbraio, pp. 7-11
  • 1998, Gross Michael , "Implantología osteointegrada con alta seguridad mediante preplanificación en tres dimensiones y simulación de la fase quirurgica", Electronic Journal of Dental Research, Volume 3, 12, pp. 7 pages

1997

  • 1997, Horowitz Robert A., "The use of osteotomes or sinus augmentation at the time of implant placement", The Compendium of continuing education in dentistry (Compend Contin Educ Dent), Volume 18, 5, pp. 441-452
  • 1997, Amet Edward M., Ganz Scott D. , "Implant treatment planning using a patient acceptance prosthesis, radiographic record base and SurgiGuides", Implant Dentistry (Implant Dent), Volume 6, 3, pp. 193-197
  • 1997, Ganz Scott D., "Mandibular tori as a source for onlay bone graft augmentation, a surgical procedure", Implant Report, Volume 9, 9, pp. 973-984
  • 1997, Kepic Thomas, "High-tech dentistry", Upland, CA Caily Bulletin, Tuesday April 5
  • 1997, Jacobs K. , "Präimplantologische Diagnostik-oder Woher weiss der Zahnarzt ,ob der Knochen gut genug für Implantate ist?", Implantologie, 1
  • 1997, Mizuki Nobuyuki, Fujita Kiyohide , "Implant Simulation Using Personal Computed System. Characteristic of SIM/Plant and preoperative clinical application.", The Quintessence, Volume 16, 6, pp. 6-11
  • 1997, Amet Edward M., Ganz Scott D. , "Implant treatment planning using a patient acceptance prosthesis, radiographic record base and SurgiGuides", Implant Dentistry (Implant Dent), Volume 6, 3, pp. 193-197
  • 1997, Levin Roger P., "Practice Success", Dental Economics (Dent Econ), June, pp. 22
  • 1997, Block Michael S. , "Radiologic planning for dental implants", Implants in dentistry, Essentials of Endosseous Implants for maxillofacial reconstruction, pp. Chapter 5
  • 1997, Bellaïche Norbert, "SIM/Plant Software: implant simulation in the practician's office", Prothèse Dentaire, Volume 129, pp. 25-30
  • 1997, Bellaïche Norbert, "Le logiciel Simplant: La simulation implantaire au cabinet du praticien", Prothèse Dentaire, Volume 129, pp. 25-30
  • 1997, Bellaïche Norbert , "Indications des techniques d'imagerie en implantologie orale", Prothèse Dentaire, Volume 129, pp. 23-24

1996

  • 1996, Cameron Lee Y.S., DMD , "Three-dimensional computer tomography in the evaluation of placement for dental implants", Hawaii dental journal (Hawaii Dent J), March/April, pp. 26-29
  • 1996, Rosenfeld A., Mecall Richard A., "The use of interactive computed tomography predict the esthetic and functional demands (..)implant-supported prostheses.", Compendium, Volume 17, 12, pp. 1125-1146
  • 1996, Stockham Charles D., "Using CT and SIM/Plant to plan implant therapy", Alpha Omegan (Journal of Alpha Omega International Dental Fraternity) (AO), Volume 89, 4, pp. 35-38
  • 1996, Tetsch Peter, Tetsch Jan , "Fortschritte der Zahnärtzlichen Implantologie", Carl Hanser Verlag München, Wien

1995

  • 1995, Jacobs K., Loutrouki F. , "Implantationsplanung mit 3D-CT-Daten", Implantologie, April
  • 1995, Ganz Scott D., "The triangle of bone - a formula for successful implant placement and restoration", The Implant Society (Implant Soc), Volume 5, 5, pp. 2-6
  • 1995, Ikumi Noriharu , "Procedure of highly predictable implant treatment. A role of CT scan in implant treatment planning. Part 1", The Quintessence, Volume 14, 11, pp. 5-14
  • 1995, Hall Scott R., "Implant diagnostics utilizing computed tomography imaging", Oklahoma Dental Association Journal (ODA Journal), Volume 85, 3, pp. 19-24

1993

  • 1993, Swaelens Bart, Kruth J.P., "Medical applications of rapid prototyping techniques", Proceedings of The Fourth International Conference on Rapid Prototyping, June 14-17, pp. 107-120.

1992

  • 1992, Kraut Richard A., "Utilization of 3D/dental software for precise implant site selection: clinical reports", Implant Dentistry, Volume 1, 2, pp. 134-139
  • 1992, Ramez J, Donazzan M, Chanavaz M, Brun JP, Tardieu P., "The contribution of scanner imagery in implant surgery and sinus overflow using frontal oblique orthogonal reconstruction", Rev Stomatol Chir Maxillofac. 1992;93(3):212-4